View LXZ2-2280-Y_8366975.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

luxeon z and luxeon z es datasheet ds120 ?2014 philips lumileds lighting company. key applications ? architectural ? downlight ? indoor area ? lamps - mr16, par, gu10 and candles ? outdoor area - high-fux street light modules ? specialty lighting ? spotlight features ? micro sized: luxeon z, 1.3 x 1.7 mm and luxeon z es, 1.6 x 2.0 mm ? undomed device architecture ? hot tested at t j = 85c ? max drive current: luxeon z es 1.2a, luxeon z 1a ? freedom from binning ? 1, 3, 5 step sdcm macadam ellipse options ? lowest thermal resistance 3c/w benefts ? highest luminance to deliver punch ? ultimate design fexibility from micro form factor ? precise optical control from an undomed architecture ? enables small customizable and scalable light engines ? leading system level lm/$ proposition luxeon z luxeon z es breakthrough luminance, design flexibility and optical control for illumination solutions introduction philips lumileds technology enables the new luxeon z and luxeon z es leds. the luxeon z is a family of micro sized illumination grade emitters that is the frst ever 1-step macadam ellipse warm white led that enables never before seen color consistency, luminance, fux density and design fexibility for next generation lighting solutions. luxeon z family is undomed, a feature that provides un-matched optical fexibility for precise beam angle control. tested and binned at application conditions (t j = 85c), the luxeon z and z es emitters are an ideal choice for indoor and outdoor light sources requiring superior beam angles, higher efcacy and lower costs.
luxeon z and luxeon z es datasheet ds120 20140326 ?2014 philips lumileds lighting company. i table of contents general information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 product selection ................................................................................. 3 optical characteristics ............................................................................. 4 electrical characteristics ........................................................................... 5 absolute maximum ratings ..................................................................... 5 jedec moisture sensitivity ..................................................................... 6 mechanical dimensions of luxeon z es ............................................................ 6 mechanical dimensions of luxeon z ............................................................... 7 solder pad design ................................................................................. 8 relative spectral distribution ....................................................................... 9 light output characteristics ....................................................................... 10 typical spatial radiation pattern .................................................................. 14 emitter pocket tape packaging for luxeon z es ................................................... 16 emitter reel packaging for luxeon z es ........................................................... 16 emitter pocket tape packaging for luxeon z ...................................................... 17 emitter reel packaging for luxeon z .............................................................. 18 product binning and labeling ..................................................................... 19 luminous flux and forward voltage bins ......................................................... 20 luxeon z and luxeon z es: 1-step, 3-step (above and below blackbody) and 5-step macadam ellipse color defnition ......................... 21
luxeon z and luxeon z es datasheet ds120 20140326 ?2014 philips lumileds lighting company. 2 general information product nomenclature luxeon z and z es emitters are specifed and binned under hot conditions comparable to those found in real- world lighting products. the test conditions for luxeon z es and luxeon z are 700 ma dc and 500 ma dc respectively with junction temperature at 85c. the part number designation is explained as follows: l x z n - a b c d - y where: n 1 for luxeon z and 2 for luxeon z es a, b designates nominal ansi cct (27 for 2700k, 30 for 3000k, rb for royal blue) c, d designates minimum cri performance (7 for 70 cri, 8 for 80 cri, 9 for 90 cri) y 1 designates 1 sdcm * , 3 designates 3 sdcm and 5 designates 5 sdcm (only for 80 and 90 cri versions. 70 cri parts or lower will not have a sdcm designation and all parts are binned within a 5 step sdcm). therefore, 3 sdcm 2700k/80 cri luxeon z es will have the following part number: l x z 2 C 2 7 8 0 - 3 therefore, 4000k/70 cri luxeon z es will have the following part number: l x z 2 - 4 0 7 0 therefore, 5 sdcm 3000k/80 cri luxeon z will have the following part number: l x z 1 C 3 0 8 0 - 5 average lumen maintenance characteristics luxeon z products are tested in compliance with lm-80. please visit www.philipslumileds.com/support/ documentation/lumen-maintenance or contact your local philips lumileds technical solutions manager for tm-21 extrapolations or other support. environmental compliance philips lumileds is committed to providing environmentally friendly products to the solid-state lighting market. luxeon z and luxeon z es products are compliant to the european union directives on the restriction of hazardous substances in electronic equipment, namely the rohs and reach directives. philips lumileds will not intentionally add the following restricted material to the luxeon z and luxeon z es: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (pbb) or polybrominated diphenyl ethers (pbde). ___________________________ * 1 sdcm is available on special request. please contact your sales representative.
luxeon z and luxeon z es datasheet ds120 20140326 ?2014 philips lumileds lighting company. 3 product selection product selection guide for luxeon z es 3v emitters junction temperature = 85c table 1. luxeon z es 3v part number nominal cct min cri 700 ma 1a 350 ma min. flux (lm) typical flux (lm) typical vf (v) typical efcacy (lm/w) typical flux (lm) typical vf (v) typical efcacy (lm/w) typical flux (lm) typical vf (v) typical efcacy (lm/w) lxz2-4070 4000k 70 220 240 2.80 122 317 2.86 111 132 2.72 139 lxz2-5070 5000k 70 220 245 2.80 125 323 2.86 113 135 2.72 142 lxz2-5770 5700k 70 220 245 2.80 125 323 2.86 113 135 2.72 142 lxz2-6570 6500k 70 220 245 2.80 125 323 2.86 113 135 2.72 142 LXZ2-2280-Y 2200k 80 140 150 2.80 77 198 2.86 69 83 2.72 87 lxz2-2780-y 2700k 80 170 185 2.80 94 244 2.86 85 102 2.72 107 lxz2-3080-y 3000k 80 180 195 2.80 99 257 2.86 90 107 2.72 113 lxz2-3580-y 3500k 80 190 205 2.80 105 271 2.86 95 113 2.72 118 lxz2-4080-y 4000k 80 190 220 2.80 112 290 2.86 102 121 2.72 127 lxz2-5080-y 5000k 80 190 220 2.80 112 290 2.86 102 121 2.72 127 lxz2-2790-y 2700k 90 140 160 2.80 82 211 2.86 74 88 2.72 92 lxz2-3090-y 3000k 90 150 170 2.80 87 224 2.86 78 94 2.72 98 lxz2-4090-y 4000k 90 150 180 2.80 92 238 2.86 83 99 2.72 104 lxz2-5790-y 5700k 90 170 190 2.80 97 251 2.86 88 105 2.72 110 notes fo ale 1 1. all luxeon z es emitters are tested and binned at 700 ma/85c. 2. philips lumileds maintains a tolerance of 6.5% on luminous fux and 2 on cri measurements. 3. in the part number the -y is the designation for the color requirement. on 80 and 90 cri versions -1 designates 1 sdcm, -3 designates 3 sdcm, -5 designates 5 sdcm. 70 cri parts or lower will not have a sdcm designation and all parts are binned within a 5 step sdcm. . product selection guide for luxeon z es 48v emitters junction temperature = 85c, test current = 40 ma table 2. luxeon z es 48v performance characteristics at 40 ma part number nominal cct minimum cri minimum flux (lm) typical flux (lm) typical vf (v) lxzh-2780-y 2700k 80 150 165 50
luxeon z and luxeon z es datasheet ds120 20140326 ?2014 philips lumileds lighting company. 4 product selection for luxeon z emitters junction temperature = 85c table 3. luxeon z part number nominal cct min cri 500 ma 700 ma 1a min. flux (lm) typical flux (lm) typical vf (v) typical efcacy (lm/w) typical flux (lm) typical vf (v) typical efcacy (lm/w) typical flux (lm) typical vf (v) typical efcacy (lm/w) lxz1-2780-y 2700k 80 100 115 2.80 82 147 2.85 74 191 2.89 66 lxz1-3080-y 3000k 80 110 124 2.80 89 159 2.85 80 206 2.89 71 lxz1-3580-y 3500k 80 110 124 2.80 89 159 2.85 80 206 2.89 71 lxz1-4080-y 4000k 80 120 130 2.80 93 166 2.85 83 216 2.89 75 lxz1-4070 4000k 70 120 134 2.80 96 172 2.85 86 223 2.89 77 lxz1-5070 5000k 70 130 148 2.80 106 189 2.85 95 246 2.89 85 lxz1-5770 5700k 70 140 152 2.80 109 195 2.85 98 253 2.89 88 lxz1-6565 6500k 65 140 154 2.80 110 197 2.85 99 256 2.89 89 1. all luxeon z emitters above are tested and binned at 500 ma/85c. 2. philips lumileds maintains a tolerance of 6.5% on luminous fux and 2 on cri measurements. 3. in the part number the -y is the designation for the color requirement. on 80 cri versions -3 designates 3 sdcm and -5 designates 5 sdcm. 70 cri parts or lower will not have a sdcm designation and all parts are binned within a 5 step sdcm. optical characteristics luxeon z es at test current 700 ma, junction temperature 85c & luxeon z at test current 500 ma, junction temperature 85c table 4. nominal ansi cct color temperature cct typical typical total included angle 1 (degrees) u typical viewing angle 2 (degrees) 2 u 1/2 2200k 2230k 160 120 2700k 2725k 160 120 3000k 3045k 160 120 3500k 3465k 160 120 4000k 3985k 160 120 5000k 5028k 160 120 5700k 5665k 160 120 6500k 6250k 160 120 notes fo ale 4 1. total angle at which 90% of total luminous fux is captured. 2. viewing angle is the of axis angle from lamp centerline where the luminous intensity is ? of the peak value.
luxeon z and luxeon z es datasheet ds120 20140326 ?2014 philips lumileds lighting company. 5 electrical characteristics luxeon z es at test current 700 ma, junction temperature 85c & luxeon z at test current 500 ma, junction temperature 85c table 5. nominal ansi cct forward voltage vf, 1 (v) typical temperature coefcient of forward voltage 2 (mv/c) d v f / d t j luxeon z es typical thermal resistance junction to thermal pad (c/w) r u j-c luxeon z typical thermal resistance junction to electrical pads (c/w) r u j-c min. max. 2200k 2.5 3.25 -1.6 3 n/a 2700k 2.5 3.25 -1.6 3 6 3000k 2.5 3.25 -1.6 3 6 3500k 2.5 3.25 -1.6 3 6 4000k 2.5 3.25 -1.6 3 6 5000k 2.5 3.25 -1.6 3 6 5700k 2.5 3.25 -1.6 3 6 6500k 2.5 3.25 -1.6 3 6 notes fo ale 5 1. philips lumileds maintains a tolerance of 0.06v on forward voltage measurements. 2. measured between t j = 25c and t j = 110c at i f = 700 ma for luxeon z es and i f = 500 ma for luxeon z. absolute maximum ratings table 6. parameter luxeon z es luxeon z dc forward current (ma) 1, 2 1200 for luxeon z es 3v parts, 45 for luxeon z es 48v parts 1000 peak pulsed forward current (ma) 1, 3 1350 for luxeon z es 3v parts, 65 for luxeon z es 48v parts 1200 esd sensitivity < 8000v human body model (hbm) class 3a jedec js-001-2012 < 8000v human body model (hbm) class 3a jedec js-001-2012 led junction temperature 1 135c 135c operating case temperature at 700 ma -40c - 135c -40c - 135c storage temperature -40c - 135c -40c - 135c soldering temperature jedec 020c 260c jedec 020c 260c allowable refow cycles 3 3 reverse voltage (vr) 5, 6 luxeon z leds are not designed to be driven in reverse bias 1. proper current derating must be observed to maintain junction temperature below the maximum. for additional information on thermal measurement guidelines please refer to application briefs ab105 and ab120. 2. residual periodic variations due to power conversion from alternating current (ac) to direct current (dc), also called ripple, with frequencies 100 hz and amplitude 150 ma and 200 ma respectively are acceptable, assuming the average current throughout each cycle does not exceed 1200 ma and 1000 ma respectively. 3. pulsed operation with a peak drive current of 1350 ma and 1200 ma respectively are is acceptable if the pulse on-time is 5 ms per cycle and the duty cycle is 50%. 4. transient reverse voltages and surge currents due to electrical switching or supply interruptions are acceptable if these events do not last for more than 10ms, the amplitude of the reverse voltage does not exceed 5v and the reverse current is less than 200a. 5. maximum 5v reverse for up to 10s is an acceptable beginning of life, one time test condition.
luxeon z and luxeon z es datasheet ds120 20140326 ?2014 philips lumileds lighting company. 6 jedec moisture sensitivity table 7. level floor life soak requirements standard time conditions time conditions 1 unlimited [ 30c / 85% rh 168h + 5 / - 0 85c / 85% rh mechanical dimensions of luxeon z es notes for figure 1: 1. do not handle the device by the top of package. excessive force on the top of the package may damage the surface or the interior of the device. 2. drawings not to scale. 3. all dimensions are in millimeters. 4. the thermal pad is electrically isolated from the anode and cathode contact pads. ??????????? ??????????? ??????????? ??????????? ??????????? ??????????? ??????????? ????? ??????? ??????????? ??????????? ??????????? ??????????? ?????????????? ??????????? ??????????? figure 1. package outline drawing for luxeon z es.
luxeon z and luxeon z es datasheet ds120 20140326 ?2014 philips lumileds lighting company. 7 mechanical dimensions of luxeon z notes for figure 2: 1. do not handle the device by the top of package. excessive force on the top of the package may damage the surface or the interior of the device. 2. drawings not to scale. 3. all dimensions are in millimeters. 4. both the anode and cathode contact pads are also the thermal pads.
luxeon z and luxeon z es datasheet ds120 20140326 ?2014 philips lumileds lighting company. 8 solder pad design notes for figures 3 and 4: 1. the drawing above shows the recommended solder pad layout on printed circuit board (pcb). 2. application brief ab120 (luxeon z es) and ab105 (luxeon z) provide the details of the pcb board layout design. in addition, the .dwg fles are available at www.philipslumileds.com and www.philipslumileds.cn.com.
luxeon z and luxeon z es datasheet ds120 20140326 ?2014 philips lumileds lighting company. 9 relative spectral distribution relative spectral distribution vs. wavelength characteristics figure 5.
luxeon z and luxeon z es datasheet ds120 20140326 ?2014 philips lumileds lighting company. 10 light output characteristics relative light output vs. junction temperature for luxeon z es, test current at 700 ma relative light output vs. forward current for luxeon z es, junction temperature = 85c figure 6. figure 7.
luxeon z and luxeon z es datasheet ds120 20140326 ?2014 philips lumileds lighting company. 11 forward current characteristics for luxeon z es, junction temperature = 85c figure 8.
luxeon z and luxeon z es datasheet ds120 20140326 ?2014 philips lumileds lighting company. 12 relative light output vs. junction temperature for luxeon z white, test current at 500 ma relative light output vs. forward current for luxeon z white, junction temperature = 85c figure 9. figure 10.
luxeon z and luxeon z es datasheet ds120 20140326 ?2014 philips lumileds lighting company. 13 forward current characteristics for luxeon z white, junction temperature = 85c figure 11.
luxeon z and luxeon z es datasheet ds120 20140326 ?2014 philips lumileds lighting company. 14 typical spatial radiation pattern luxeon z es luxeon z es typical polar radiation pattern figure 12. figure 13.
luxeon z and luxeon z es datasheet ds120 20140326 ?2014 philips lumileds lighting company. 15 typical spatial radiation pattern luxeon z luxeon z typical polar radiation pattern 0% 20% 40% 60% 80% 100% 120% -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 relative intensity (%) anglular displacement (deg) white (lxz1-4070) figure 14. 0 0.2 0.4 0.6 0.8 1 0 30 60 90 120 150 180 -150 -120 -90 -60 -30 white (lxz1-4070) figure 15.
luxeon z and luxeon z es datasheet ds120 20140326 ?2014 philips lumileds lighting company. 16 emitter pocket tape packaging for luxeon z es notes for figure 16: 1. all dimensions are in millimeters emitter reel packaging for luxeon z es figure 1. emitter pocket tape packaging for luxeon z es. figure 17. emitter reel packaging for luxeon z es.
luxeon z and luxeon z es datasheet ds120 20140326 ?2014 philips lumileds lighting company. 17 emitter pocket tape packaging for luxeon z notes for figure 18: 1. all dimensions are in millimeters 40.1 1.750.1 8 +0.3 -0.1 1.750.1 sprocket hole ?1.50.1 0.200.02 1.500.05 0.880.05 5 max 1.900.05 5 max
luxeon z and luxeon z es datasheet ds120 20140326 ?2014 philips lumileds lighting company. 18 emitter reel packaging for luxeon z figure 19. emitter reel packaging for luxeon z.
luxeon z and luxeon z es datasheet ds120 20140326 ?2014 philips lumileds lighting company. 19 product binning and labeling purpose of product binning in the manufacturing of semiconductor products, there are variations in performance around the average values given in the technical data sheets. for this reason, philips lumileds bins the led components for luminous fux and forward voltage (v f ). color is ofered in a single 1 step, 3-step or 5-step macadam ellipse color space centered on the ansi cct color bins. for additional information please review the macadam ellipse technical defnition section. decoding product bin labeling luxeon z es and luxeon z emitters are labeled using a four digit alphanumeric code (cat code) depicting the bin values for emitters packaged on a single reel. all emitters packaged within a reel are of the same 3-variable bin combination. reels of luxeon z emitters are labeled with a four digit alphanumeric cat code following the format below. abcd a = flux/radiometric power bin (l, m, etc.) b and c = color bin (5a, 5b, 5c, 5d, 50, 30, 3u, 3l, 10) d = v f bin (p, r, s) table 8. luxeon z and z es cat code logic a b c d flux bin per ds 1 for 1 step 0 for 1 step v f bin 3 for 3 step 0 for 70 cri u or l (above (u) or below (l) black body line) for 80 cri 5 for 5 step a/b/c/d (5 step quadrant for 80 and 90 cri), 0 for 70 cri or less 1. only 5 step available eg: lxz2-4070 etc will, by default, mean 5 step. 2. 3 step and 1 step are sub sets of 5 step hence the cat code will state 30 or 10 if the part is actually 3 or 1 step . 1. 1 step available in 2280/90, 2780/90, 3080/90, 3580 only. please contact your philips lumileds sales representative for support. 2. 3u and 3l will be the color bin cat codes. for product below black body below work with your distribution representative on supportability per volume requirements.
luxeon z and luxeon z es datasheet ds120 20140326 ?2014 philips lumileds lighting company. 20 luminous flux and forward voltage bins table 9 lists the standard photometric luminous fux bins for luxeon z es and luxeon z emitters (tested and binned at 700 ma and 500 ma, respectively, and t j = 85c). although several bins are outlined, product availability in a particular bin varies by production run and by product performance. not all bins are available in all colors. table 9. flux bins bin code minimum photometric flux (lm) maximum photometric flux (lm) d 130 140 e 140 150 f 150 160 g 160 170 h 170 180 j 180 190 k 190 200 l 200 210 m 210 220 n 220 230 p 230 240 q 240 250 r 250 260 s 260 270 table 10 lists minimum and maximum v f bin values per emitter. although several bins are outlined, product availability in a particular bin varies by production run and by product performance. table 10. v f bins bin code minimum forward voltage (v) maximum forward voltage (v) p 2.50 2.75 r 2.75 3.00 s 3.00 3.25
luxeon z and luxeon z es datasheet ds120 20140326 ?2014 philips lumileds lighting company. 21 luxeon z and luxeon z es: 1-step, 3-step (above and below blackbody) and 5-step macadam ellipse color defnition table 11. luxeon z and luxeon z es 1-step macadam ellipse parameters nominal ansi cct color space center point (cx, cy) major axis, a minor axis, b ellipse rotation angle (degrees) 2200k single 1-step macadam ellipse (0.5020, 0.4156) 0.00287 0.00132 49.27 2700k single 1-step macadam ellipse (0.4578, 0.4101) 0.00270 0.00140 53.70 3000k single 1-step macadam ellipse (0.4338, 0.4030) 0.00278 0.00136 53.22 3500k single 1-step macadam ellipse (0.4073, 0.3917) 0.00309 0.00138 54.00 only aailale in 80 and 0 cr. table 12. luxeon z and luxeon z es 3-step macadam ellipse parameters nominal ansi cct color space center point (cx, cy) major axis, a minor axis, b ellipse rotation angle (degrees) 2200k single 3-step macadam ellipse (0.5020, 0.4156) 0.00863 0.00398 49.27 2700k single 3-step macadam ellipse (0.4578, 0.4101) 0.00810 0.00420 53.7 3000k single 3-step macadam ellipse (0.4338, 0.4030) 0.00834 0.00408 53.2 3500k single 3-step macadam ellipse (0.4073, 0.3917) 0.00927 0.00414 54.0 4000k single 3-step macadam ellipse (0.3818, 0.3797) 0.00939 0.00402 53.7 5000k single 3-step macadam ellipse (0.3447, 0.3553) 0.00822 0.00354 59.6 table 13. luxeon z and luxeon z es 5-step macadam ellipse parameters nominal ansi cct color space center point (cx, cy) major axis, a minor axis, b ellipse rotation angle (degrees) 2200k single 5-step macadam ellipse (0.5020, 0.4156) 0.01438 0.00663 49.27 2700k single 5-step macadam ellipse (0.4578, 0.4101) 0.01350 0.00700 53.7 3000k single 5-step macadam ellipse (0.4338, 0.4030) 0.01390 0.00680 53.2 3500k single 5-step macadam ellipse (0.4073, 0.3917) 0.01545 0.00690 54.0 4000k single 5-step macadam ellipse (0.3818, 0.3797) 0.01565 0.00670 53.7 5000k single 5-step macadam ellipse (0.3447, 0.3553) 0.01370 0.00590 59.6 5700k single 5-step macadam ellipse (0.3287, 0.3417) 0.01243 0.00533 59.09 6500k single 5-step macadam ellipse (0.3123, 0.3282) 0.01115 0.00475 58.57 ailale in 70, 80 and 0 cr. note fo ales 11, 12 13 ? philips lumileds maintains a tester tolerance of 0.005 on x, y color coordinates. roh s compliant no. e352519 b 1 b 2 b 3 b 4 0.39 0 0.39 5 0.40 0 0.40 5 0.41 0 0.41 5 0.42 0 0.42 5 0.43 0 0.44 5 0.45 0 0.45 5 0.46 0 0.46 5 0.47 0 0.47 5 cie 1931 y c ie 1931 x note: c olor bin space illustration for 2700k, 3000k & 3500k. f or cct above 4000k, the elipse centers are all above bbl line. bin 3 u [1] bin 3 l [ 2 ] [ 1] color bin 3u denot es t he area above bbl enclosed by 3-st ep mae and (out side) 1-step mae [ 2] color bin 3l denotes the area below bbl enclosed by 3-st ep mae and (out side) 1-step mae b 1 t o b 4 ar e int ersection points on bbl bin 5 a bin 5 b bin 5 c bin 5 d bin 10 color space defnition for above and below blackbody parameter defnition of macadam ellipse
who we are philips lumileds focuses on one goal: creating the worlds highest performing leds. the company pioneered the use of solid-state lighting in breakthrough products such as the frst led backlit tv, the frst led fash in camera phones, and the frst led daytime running lights for cars. today we ofer the most comprehensive portfolio of high quality leds and uncompromising service. philips lumileds brings leds qualities of energy efciency, digital control and long life to spotlights, downlights, high bay and low bay lighting, indoor area lighting, architectural and specialty lighting as well as retroft lamps. our products are engineered for optimal light quality and unprecedented efcacy at the lowest overall cost. by ofering leds in chip, packaged and module form, we deliver supply chain fexibility to the inventors of next generation illumination. philips lumileds understands that solid state lighting is not just about energy efciency. it is about elegant design. reinventing form. engineering new materials. pioneering markets and simplifying the supply chain. its about a shared vision. learn more about our comprehensive portfolio of leds at www.philipslumileds.com. luxeon z and luxeon z es datasheet ds120 20140326 ?2014 philips lumileds lighting company. all rights reserved. luxeon is a registered trademark of the philips lumileds lighting company in the united states and other countries. www.philipslumileds.com www.philipslumileds.cn.com philips lumileds lighting company shall not be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. although philips lumileds lighting company has attempted to provide the most accurate information and data, the materials and services information and data are provided as is and philips lumileds lighting company neither warranties, nor guarantees the contents and correctness of the provided information and data. philips lumileds lighting company reserves the right to make changes without notice. you as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data.

▲Up To Search▲

Price & Availability of LXZ2-2280-Y

	To Download LXZ2-2280-Y Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .